Stock Shapes(Sheets and Rods)

PEI (Polyetherimide) stock shapes, including rods and sheets, deliver exceptional performance with high mechanical strength, thermal stability (up to 170°C), and strong chemical/creep resistance. Ideal for precision machining, PEI’s torque strength and dimensional stability make it a cost-effective alternative to metal in harsh environments. Key features include weather resistance, γ-radiation tolerance, self-extinguishing properties, and stress crack resistance. Widely used in electrical engineering, aircraft components, and food industry applications, PEI combines durability with versatility for high-demand mechanical and thermal challenges.
Our PEI Stock Shapes are the ideal choice for applications requiring the following characteristics:
Features: Glass transition temperature (Tg) up to 217°C, high heat deflection temperature (HDT).
Customer Benefits: Ensures long-term stable performance of components in high-temperature environments, reduces failures caused by thermal deformation or performance degradation, and broadens application scope.
Features: Maintains excellent tensile strength and flexural modulus even at high temperatures.
Customer Benefits: Capable of withstanding high loads, maintains structural integrity and dimensional accuracy, suitable for precision and load-bearing components.
Features: Achieves UL94 V-0 rating (depending on thickness) without adding flame retardants, low smoke emission during combustion.
Customer Benefits: Meets stringent fire safety standards in industries such as aerospace, transportation, and electronics, enhancing end-product safety.
Features: Resistant to a wide range of chemicals, including most hydrocarbons, alcohols, and halogenated solvents. Excellent hydrolytic resistance.
Customer Benefits: Suitable for environments exposed to chemical media or requiring repeated steam sterilization (e.g., medical devices), extending component lifespan.
Features: Low moisture absorption, low and uniform coefficient of thermal expansion.
Customer Benefits: Maintains precise dimensions across varying temperature and humidity conditions, ideal for precision components with tight tolerance requirements.
Features: High dielectric strength, stable dielectric constant and dissipation factor.
Customer Benefits: Reliable electrical insulation material, suitable for various electrical and electronic components.
Features: Can be easily machined into complex shapes using traditional metal and plastic processing methods (e.g., turning, milling, drilling).
Customer Benefits: Reduces machining difficulty and costs, enabling rapid production of precision parts.
Rods: Standard diameter range: 6mm – 150mm, standard lengths: 1000mm, 2000mm, 3000mm
Sheets: Standard thickness range: 5mm – 80mm, standard dimensions: 600x1200mm, 1000x1000mm, 1000x2000mm
Standard grade:
PEI Natural (Original Color): Standard unfilled grade, with the inherent performance balance of PEI. (Usually amber transparent color)
(Optional) Other grades:
PEI GF30 (30% glass fiber reinforced): Provides higher rigidity and dimensional stability.
PEI CF (Carbon Fiber Reinforced): Provides higher strength, rigidity and electrical conductivity.
Customized service:
We also offer customization services for non-standard sizes and specific grades. Please contact us to discuss your specific requirements.
PEI stock shapes from CHOZEN TECH are based on Sabic’s ULTEM family of resins which includes the 1000, 2100, 2200 and 2300 grades, so they offer imported-grade polyetherimide materials at competitive costs. Polyetherimide (PEI) is an amorphous, moderately heat-resistant plastic with high performance characteristics where strength and stability are concerned. ULTEM™ PEI boasts both a high glass transition temperature (Tg≈217 °C) and inherent flame retardation properties (UL94 V-0 rating). This makes it ideal for use under continuous service conditions up to approximately 170 °C (340 °F) where stiffness and dielectric insulation must be maintained. It also has excellent resistance to a wide variety of chemicals (oils, alcohols, acids, etc). Furthermore, ULTEM™ PEI unlike other products of the same type or genre retains strength under harsh conditions. All these characteristics add up to an assuredly alternative for imported brands.
The table below summarizes typical properties of ULTEM™ PEI (unfilled vs. glass-reinforced grades). All values are at room temperature (23 °C) unless noted:
| Property | ULTEM™ 1000(unfilled) | ULTEM™ 2100 (10% glass) | ULTEM™ 2200 (20% glass) | ULTEM™ 2300 (30% glass) |
|---|---|---|---|---|
| Glass content | 0% (clear/translucent) | 10% | 20% | 30% |
| Density (g/cm³) | 1.28 | 0.34 | 1.42 | 1.51 |
| Tensile Strength (MPa) | 114 | 116 | 117 | 117 |
| Tensile Modulus (GPa) | 3.45 | 4.48 | 4.83 | 5.52 |
| HDT @1.8 MPa (°C) | 204 | 207 | 208 | 210 |
| Glass Transition (Tg, °C) | 217 | 217 | 217 | 217 |
| Max. Service Temp (°C) | 171 | 171 | 171 | 171 |
| Flammability (UL94) | V-0 | V-0 | V-0 | V-0 |
| Dielectric Const. (1 kHz) | 3.15 | 3.5 | 3.5 | 3.7 |
| Volume Resistivity (Ω·cm) | >10¹³ | >10¹³ | >10¹³ | >10¹³ |
Table: Typical properties of Ultem™ PEI (PEI 1000/2100/2200/2300). Values are for reference; consult the full TDS for design.
Ready to source high-performance PEI rod/sheet? Request a quote now and unlock the advantages of CHOZEN TECH’s PEI stock shapes.



PEI offers a highly balanced set of properties. Compared to PPSU, PEI has higher rigidity and dimensional stability, making it suitable for precision machining. Against PPS, PEI performs better in electrical insulation and thermal shock resistance. While slightly less strong than PAI (e.g., Torlon), PEI is easier to process, more cost-effective, and inherently flame-resistant (UL94 V-0) without additives.
Yes, all our PEI stock shapes are based on Sabic-certified ULTEM™ series materials (e.g., 1000, 2300), ensuring mechanical, electrical, and thermal properties consistent with international counterparts, making them viable alternatives to imported brands.
ULTEM™ PEI exhibits excellent steam sterilization resistance, enduring repeated high-temperature, high-pressure autoclaving (typically 121°C–134°C steam). It is ideal for medical device housings, test fixtures, etc. We can assist in recommending resins compliant with ISO 10993 or USP Class VI for specific medical needs.
Yes. We support custom lengths, thicknesses, and diameters, as well as cutting, turning, or basic machining per customer drawings. Share your dimensions or drawings with us for precise quotes and lead times.
Common sizes like Ø20–100 mm (rods) and 10–30 mm thickness (sheets) are partially stocked, with shipment typically in 3–7 days. Non-standard or large sizes usually take 10–20 days. Contact us for real-time inventory lists or submit specific size requests.
Yes. PEI’s excellent dielectric properties (low dielectric constant and loss factor), combined with dimensional stability and heat resistance, make it ideal for antenna structures, electronic insulation components, high-frequency terminals, and connectors.
If you need a quotation, documents, or samples, please contact us.