Nylon Microspheres for Coating Additives

High-Sphericity

Nylon Microspheres for coating additives

Overview

Introducing CHOZEN TECH’s precision nylon (polyamide) microspheres – innovative polymer beads that offer ultrasmooth mattes and ultra-durables in advanced coatings. These ultra-spherical particles – produced through a proprietary “reactive phase-separation” polymerization process – flow like tiny ball-bearings when it isn’t dry, for greater density and less viscosity for the wet paint. The end result is outstanding flow and leveling (elimination of stipple or orange peel) and a smooth, sand finish appearance. In fact, the coatings containing these nylon spheres, in use, show that they are much more scuff/burnish resistant and abrasion resistant than that seen with the regular fillers. With such improvements, they can be good matting agents and functional additives for high-quality coatings.

CHOZEN TECH nylon microspheres are micron-sized polyamide beads (PA6, PA12 and PA612 grades) that are available as bright-white, free flowing spherical powders. The product line offers tailored melting points (≈142–223 °C) and melt flow indices (≈0.1–50 g/10min) to meet diverse formulation needs. The beads have a very narrow particle size distribution (e.g. D₅₀ approximately 2-40 μm depending on grade) and are virtually perfect spheres, reducing defects in the cured film. The nylon spheres, chemically neutral (inert) and physically round (smooth), are compatible with just about any type of resin or solvent. They can be incorporated in waterborne, solventborne or UV-curable coating systems without loss of stability. These polymeric microspheres function mainly as lightweight fillers with low pigment and polymer versus resin demand (i.e. VOC) in the formulation.

Key Features & Technology

Using our independently developed patented ‘reactive phase separation’ polymerization technology, we have successfully polymerized monomers directly into nylon microspheres of the desired particle size.

Compared with the nylon powder produced by the traditional solvent precipitation method, our product has obvious advantages in the following aspects

1. High Sphericity

Thanks to the precise control of the phase inversion of polymerization, compared with traditional nylon “powders”, this product is in a relatively regular “spherical” shape. Good sphericity endows the powder with excellent fluidity, which is conducive to improving the uniform dispersion of the powder in coatings as well as the quality of the paint film.

compare01

Existing products on the market

Nylon microspheres of our company

2. Reasonable Particle Size Distribution

The particle size and particle size distribution of nylon microspheres can be effectively controlled by adjusting the formula and precisely controlling the polymerization process. The average particle size D50 can be controllably adjusted within the range of 2 to 40 μm.

3. Strong Designability

Through the controllable design of chemical composition and molecular structure, we can provide customers with nylon microspheres of different melting points, different melt indices, and different hardness, fully meeting customers’ individualized needs.

  • Adjustable melting point range: 142°C – 223°C.
  • The types of products available: PA6, PA12, PA612.
  • Adjustable melt flow index range: 0.1 – 80 g/10 min (at 230°C, under a load of 2.16 KG).

Functions in Coatings

1. Improve wear resistance performance

Nylon microspheres possess relatively high hardness and mechanical strength. After being added to coatings, they form a uniform wear-resistant layer on the surface of the coating. When the coating is subject to friction, the nylon microspheres can withstand part of the frictional force, reducing the wear of the coating and thus enhancing the wear resistance performance of the coating.

2. Improve scratch resistance performance

The nylon microspheres are evenly distributed in the coating. When the coating is scratched by external objects, the nylon microspheres can disperse the scratching force, preventing the scratching force from concentrating on a certain point of the coating, thereby reducing the occurrence of scratches and improving the scratch resistance performance of the coating.

3. Improve leveling property

The addition of nylon microspheres can adjust the rheological properties of the coating, making it easier to level during the construction process, reducing the flaws and ripples on the the surface of the coating, and improving the flatness and glossiness of the coating.

4. Increase the flexibility of the coating

Nylon microspheres have excellent flexibility and elasticity. They can absorb, to a certain extent, the stress and strain that the coating is subjected to during use, preventing the coating from cracking, peeling and other phenomena caused by the action of external forces, thereby increasing the flexibility and durability of the coating.

5. Thermal and Chemical Stability

Compared with the traditional PS microspheres and PMMA microspheres used in coatings, nylon microspheres have excellent solvent resistance and high heat resistance. They are highly suitable for organic coatings that need to undergo high-temperature curing.

Material Performance

We can provide nylon microspheres with various properties to meet your ultimate requirements for the products. The following table lists the main product parameters.

Grades Nylon Types Average Particle Size
(µm)
Specific Surface Area
(㎡/g)
Density
(g/cm³)
Melting Point
(℃)
Application Fields
CZ-PA6F-4 PA6 4±1 12 1.13 222 Ink, UV-cured varnish
CZ-PA6F-7 PA6 7±1 9 1.13 222 Backlight module, industrial coating
CZ-PA6F-20 PA6 20±2 4 1.13 222 Composite materials, industrial coatings
CZ-PA6F-30 PA6 30±3 3 1.13 222 Industrial coatings
CZ-PA6F-40 PA6 40±4 2.5 1.13 222 Industrial coatings, powder coating
CZ-PA612F-10 PA612 10±2 8 1.06 146 Paper coating, transfer paper
CZ-PA612F-20 PA612 20±2 4 1.06 146 Industrial coatings
CZ-PA12F-7 PA12 7±1 9 1.03 172 Backlight module, industrial coating
CZ-PA12F-20 PA12 20±2 4 1.03 172 Composite materials, industrial coatings
CZ-PA12F-30 PA12 30±3 3 1.03 172 Industrial coatings, composite materials

Note: According to customers’ individualized needs, microsphere products with different particle sizes, different melting points and different particle size distributions can be customized.

For detailed data sheets, or sample requests, please fill out the form on the right.👉🏻

If you need microsphere products for 3D printing or other fields, please visit our product series page.

Cases Display

FAQ

Nylon microspheres provide a unique combination of high sphericity, optimized hardness, and low oil absorption, which leads to a more uniform matte finish with a softer feel. Unlike angular silica particles, they do not increase surface roughness excessively or impair scratch resistance. Compared to wax-based additives, nylon microspheres have better thermal and chemical resistance, making them ideal for industrial and high-temperature bake applications.

Yes. These microspheres are chemically inert and can be dispersed in a wide range of systems including waterborne, solventborne, UV-curable, and even powder coatings. Their surface properties allow for easy wetting and stable dispersion, often without the need for additional dispersants.

Nylon microspheres are white and opaque, so they do not introduce color but may slightly affect transparency in clear coats. In pigmented systems, they help reduce gloss without significantly dulling color intensity. Their small particle size and tight distribution allow for controlled matting without haze, making them especially effective in semi-matte and satin finishes.

They can be post-added during the let-down stage or dispersed with the pigment/filler grind. High-shear mixing is generally not required due to their spherical shape and free-flowing nature. Recommended usage levels range from 0.5% to 5% by weight, depending on the desired effect (e.g., matting vs. abrasion resistance). Pre-testing in small batches is recommended to determine optimal dosage.

The elastic yet hard structure of polyamide particles allows them to absorb mechanical stress and distribute abrasion forces evenly across the coating. This results in improved scrub resistance, anti-burnish properties, and resistance to scuffing or surface wear, particularly valuable in high-traffic or high-touch environments.

Yes. Nylon microspheres are non-reactive and generally do not interfere with common coating additives like thickeners, dispersants, surfactants, or defoamers. However, in highly structured systems, slight adjustments to rheology modifiers may be needed to account for their spherical shape and impact on flow.

Store in a dry, sealed container at ambient temperature. Although nylon is moisture-sensitive to some extent, these microspheres are packaged to minimize water uptake. Avoid exposure to direct humidity or high temperatures for extended periods. Before use, allow the material to equilibrate to room temperature to avoid condensation.

Need Support?

If you need a quotation, documents, or samples, please contact us.

en_USEnglish